Drive DeVilbiss SleepCube Bilevel ST Bipap

DeVilbiss SleepCube Bilevel ST Bipap

DeVilbiss SleepCube Bilevel ST Bipap device is designed to enhance the breathing of patients with spontaneous respiration. It will not completely take over the breathing for the patient, but instead helps a patient who has chronic respiratory failure, difficulty breathing, or obstructive sleep apnoea

Features:

Pressure range of between 3 and 25 cm H2O

Three operating modes: CPAP, Spontaneous, Spontaneous Timed and Timed only

Smallest footprint of all leading CPAP devices with heated humidification system attached

SmartCode remote data compliance feature included, which encodes usage data into a series of letters and numbers that can be easily decrypted using free software or online at https://www.sleepcube.com

Among the quietest CPAPs on the market – only 26 dBA

Can be operated from a 12V DC source such as that found in a motor home (not with heated humidifier) and will switch automatically to AC power if connected and available

Auto-switching universal power supply of 100 – 240 V and 50 – 60 Hz, and automatic altitude compensation between 0 and 2600m (9000ft)

Auto on/off automatically starts the flow of air on breathing into the mask and stops the flow of air when mask is removed

Delay pressure ramp eases the device to the prescribed pressure. Ramp delay settings of 0 to 45 minutes in 5-minute increments

Visual mask off alert feature

Supplied with 6ft tubing as standard.

Large slip-resistant pads on bottom of unit minimise movement on the bedside table during the night

Patient air tubing extends from the back of unit to enhance visual appeal

Integrated heated humidification system easily docks onto the bottom of the unit without requiring a separate hose or power cord

SmartLink module and software available for more detailed patient therapy management. Data is transferred to the PC via SD card for further analysis and reporting using the SmartLink software package.

Integrated event detection feature

Real-time display – LCD display shows actual pressure, leak rate and patient breathing parameters such as breath rate, I/E ratio, minute volume and tidal volume

Customisable trigger – the sensitivity of the trigger can be adjusted on a scale of 1 – 10 (1 being most sensitive)

Includes:

SleepCube device

Air supply tubing

Spare filter pack

User manual

AC line cord

Carrying case

Humidifier

Mask